Table of Contents
Advertisement
6. Programmable Features
Feature/Code
Setting recall time
{#}{7}{2}
Changing the receiving
mode in the manual answer
setting
{#}{7}{3}
Setting the location where
you use
{#}{7}{4}
Setting the connecting
tone
{#}{7}{6}
Changing the TEL/FAX
delayed ring setting
{#}{7}{8}
Setting toner save feature
{#}{7}{9}
44
Selection
The recall time depends on your telephone exchange or host PBX.
{0} "80msec"
{1} "90msec"
{2} "100msec" (default)
{3} "110msec"
{4} "160msec"
{5} "200msec"
{6} "250msec"
{7} "300msec"
{8} "400msec"
{9} "600msec"
{*} "700msec"
{#} "900msec"
Note:
L If the fax machine is connected via a PBX, PBX functions (transferring
a call, etc.) might not work correctly. Consult your PBX supplier for the
correct setting.
{1} "TEL" (default): Telephone mode (page 33)
{2} "TEL/FAX": Telephone/Fax mode (page 34)
This setting must match your location.
L The language setting is also available (feature #48 on page 43).
{1} "CZECH" (default): To use in Czech.
{2} "SLOVAKIA": To use in Slovakia.
{3} "HUNGARY": To use in Hungary.
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You can use
these tones to confirm the status of the other party's machine.
{1} "ON" (default): You will hear connecting tones.
{2} "OFF": Deactivates this feature.
L If the ring back tone continues, the other party's machine may not be a
fax machine or may have run out of paper. Check with the other party.
L The connecting tone volume cannot be adjusted.
If you use an extension telephone when this unit is in TEL/FAX mode,
select the desired number of times the extension telephone rings before
the unit answers the call.
{2} "2" (default)
{3} "3"
{4} "4"
Note:
L See page 34 for details.
{1} "ON": The toner cartridge will last longer.
{2} "OFF" (default): Deactivates this feature.
Note:
L This feature may lower the print quality by reducing toner consumption.
Advertisement
Table of Contents
