Table of Contents
Advertisement
Connections and Setup
2 Preparation
2.1 Connections
Important:
L The unit will not function when there is a power
failure. To make calls in emergency situations,
you should connect a telephone that can
function during a power failure to the telephone
line.
2.1.1 Base unit
1 Telephone line cord
L Connect to telephone network.
2 Mains lead
L Connect to Household Mains Supply (220 V –
240 V, 50 Hz).
1
Caution:
L The mains lead must remain connected at all
times.
L Never install telephone wiring during a lightning
storm.
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord included in
this unit.
L Do not extend the telephone line cord.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
2
L If you use the unit with a computer and your internet
provider instructs you to install a filter (3), please
connect the telephone line cord of the unit.
2.1.2 Charger unit
1 AC adaptor
L Connect to Household Mains Supply (220 V –
240 V, 50 Hz).
2 Hooks
L Fasten the AC adaptor cord to prevent it from
being disconnected.
3 Screws (not included)
L The charger can be mounted on the wall, if
required.
2
25 mm
3
Caution:
L USE ONLY WITH the included Panasonic AC
adaptor.
L The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
2. Preparation
3
1
17
Advertisement
Table of Contents
