Table of Contents
Advertisement
10.3.8 SMS
Problem
I cannot send or receive SMS
messages.
The SMS message centre
number is logged in the caller
list and the message is not
received.
"FD" is displayed.
"FE" is displayed.
"E0" is displayed.
"," is not displayed after you
display a message. An error
code is displayed.
10.3.9 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If delayed transmission (feature #25 on page 51) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
Cause & Solution
L You have not subscribed to the appropriate service. Consult your service
provider.
L The SMS message centre number(s) are not stored or are incorrect. Store
the correct numbers (page 31).
L Message transmission was interrupted. Wait until the message has been
sent before using other telephone functions.
L Someone tried to send you a message while SMS is turned OFF.
L The unit could not connect to the SMS message centre. Confirm that the
correct SMS message centre numbers are stored (page 31). Confirm that
SMS is turned ON (page 31).
L An error occurred while sending the message. Try again.
L Your telephone number is permanently withheld or you have not subscribed
to the appropriate service. Consult your service provider.
L When an error code ("FD", "FE", or "E0") is displayed, "," will not be
displayed even if you have displayed the message.
10. Help
73
Advertisement
Table of Contents
