Table of Contents
Advertisement
Cordless Handset
2.5 Battery installation /
replacement
2.5.1 Installing the batteries
1
Insert the batteries negative (−) terminal first.
2
Close the battery cover.
2.5.2 Replacing the batteries
If 7 flashes even when the batteries have
been fully charged, both batteries must be
replaced. Please use only Panasonic
batteries. See page 9 for accessory information.
Important:
L Charge the new batteries for about 7
hours before initial use.
L When replacing the batteries, ensure that
the correct battery type is selected (page
75) even if you install the same type of
batteries.
L Use only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
L Do not mix old and new batteries.
1
Press the notch on the cover firmly and slide
it in the direction of the arrow.
2
Remove the batteries positive (+) terminal
first. Replace both batteries. See the battery
installation procedure.
2. Installation
19
Advertisement
Table of Contents
