Table of Contents
Advertisement
8. Answering Machine
{6} Play greeting message
L The unit will playback the greeting message.
{7} Record greeting message
L Speak after the long beep and press {9} to
stop the operation.
{9} Repeat voice guidance
L The voice guidance will start. Enter remote
commands as directed.
{0} Turn OFF the answering machine
L The unit hangs up and will switch to TEL
mode.
{*}{4} Erase a specific message (During
playback)
L The current message is erased.
L A short beep will sound and the next
message will be played.
{*}{5} Erase all messages
L All recorded messages are erased.
L A long beep will sound and the unit will
announce there are no messages.
{*}{6} Erase greeting message (During
greeting message playback)
L Your greeting message will be erased. The
unit will answer a call with a pre-recorded
greeting message.
{*}{#} End of remote operation
L You can also hang up to end the remote
operation at any time.
To turn the auto answer setting ON
1. Call your unit and wait for 10 rings.
L A beep will sound.
2. Enter the remote operation ID (page 59, or
feature #11 on page 64) within 8 seconds.
L The unit will play the greeting message,
and the auto answer setting will be turned
ON. The receiving mode will be set to
TAM/FAX or FAX ONLY mode, depending
on the setting of feature #77 (page 68).
3. Hang up the handset.
62
Advertisement
Table of Contents
