Table of Contents
Advertisement
9. Programmable Features
8. Press {SET}.
9. Enter the transmission start time.
L If you select 12-hour time entry when you
set the date and time (page 24), press
{*} repeatedly to select "AM" or "PM".
L If you selected 24-hour time entry when
you set the date and time (page 24), the
time is set using 24-hour time entry.
10. Press {SET}.
11. Press {MENU}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=OFF
[±]
"ON": The Caller ID list will be printed
automatically each time the unit logs 50 different
callers (page 35).
"OFF" (default): The Caller ID list will not be
printed, but the unit will keep a record of the
information for the last 50 different callers.
Code #28: Setting call bar
CALL BAR
PRESS SET
This feature prohibits making outside calls with
the base unit. When call bar is turned ON, only
intercom calls and emergency calls can be
made. To store emergency numbers, see page
77.
1. Press {MENU}.
2. Press {#}, then {2}{8}.
3. Press {SET}.
4. Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 78).
5. Press {A} or {B} repeatedly to select "ON".
6. Press {SET}.
7. Press {MENU}.
Note:
L When call bar is turned ON, o is displayed
on the base unit.
L To prohibit making outside calls with the
cordless handset, see page 74.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
=OFF
[±]
66
See page 51 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D
[±]
See page 52 for details.
Code #34: Setting the quick scan
QUICK SCAN
=OFF
[±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
"ON": The unit will scan the document and store
it into memory first, then the unit will start
sending or copying.
"OFF" (default): Deactivates this feature.
Note:
L If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
cancelled and this feature will be turned OFF
automatically.
Code #36: Receiving oversized documents
RCV REDUCTION
=92%
[±]
If the size of the document sent by the other
party is as large as, or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
Setting
Recording
paper size
"100%"
A4
"92%"
A4
(default)
"86%"
A4
"72%"
A4
Note:
L The information of the sending party is
printed on the top of each page. Therefore,
even if the original document is the same size
as the recording paper, the document will be
divided into 2 sheets when printed at
"100%". Select "92%" to print on 1 sheet.
Original
document
size
Letter
A4
A4
Legal
Advertisement
Table of Contents
