Copying On An S-Vhs (Or A Vhs) Cassette; Recording The Contents Of Other Equipment - Panasonic NV-GX7B Operating Instructions Manual

1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
W.B/SHUTTER/IRIS/
(21)
MF/VOL/JOG
PUSH
(19)
2
Continuing the aforesaid setup, select [A.DUB INPUT]
>> [MIC] or [AV IN].
≥Set to [AV IN] when external device is used, and to [MIC]
when an external or built-in microphone is used.
≥Switch the Movie Camera over to the Still Playback
Mode where you want to add new sound.
3
Press the [A.DUB] Button
Controller.
MULTI/
REC A.DUB
P-IN-P ¥
V /REW PLAY FF/ W
6 1 5
STILL ADV PAUSE STILL ADV
E ; D
INDEX STOP INDEX
K L
∫
SELECT
4
To start Audio Dubbing, press the [;] Button
the Remote Controller.
To Cancel Audio Dubbing
Press the [;] Button (74) on the Remote Controller.
The Movie Camera is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit Audio
Dubbing
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio Dubbing.
MIX: It plays back both the original sound and the sound
added by Audio Dubbing simultaneously.
≥For other notes concerning this item, see

Copying on an S-VHS (or a VHS) Cassette

(Dubbing)
After connecting the Movie Camera and the VCR as
illustrated, start the following procedures.
21-pin Adaptor
[VIDEO IN] [S-VIDEO IN]
[AUDIO IN]
1 2
AV IN/OUT
PHONES/
REMOTE
1 AV Cable
2 S-Video Cable (not supplied)
(60)
on the Remote
T
(60)
W
(74)
(74)
.
-40-
S-VIDEO
IN/OUT
VCR Mode
≥If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
≥Be sure to press the [OSD] Button (
Controller prior to copying so that no indications are visible.
Otherwise, the displayed tape counter and function
indications are also copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an erasure
prevention tab.
≥If various setups (such as external input, tape speed,
etc.) are required, please refer to the operating
instructions of your VCR.
Movie Camera:
3
Press the [1] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop recording.
Movie Camera:
6
Press the [∫] Button to stop playback.

Recording the Contents of Other Equipment

on
After connecting the Movie Camera and the other
equipment as illustrated, start the following procedures.
[VIDEO OUT]
[AUDIO OUT]
1
1 AV Cable
2 S-Video Cable (not supplied)
≥If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
Movie Camera:
1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
W.B/SHUTTER/IRIS/
(21)
MF/VOL/JOG
(19)
2
Insert an unrecorded Cassette.
Other Equipment:
3
Insert a recorded Cassette and start playback.
-26-
) on the Remote
-6-
21-pin Adaptor
[S-VIDEO OUT]
2
AV IN/OUT
S-VIDEO
PHONES/
IN/OUT
REMOTE
PUSH