Table of Contents
Advertisement
Copying your DV Cassette to an S-VHS or VHS
Cassette (oubbing)
2,4,5
,
After connecting the Palmcorder and the S-Video, Video and Audio
|
Input Jacks (@) of the VCR as illustrated on the left, start the following
procedures.
¢ Be sure to press the [OSD] Button on the Remote Controller before copying
so that no indications are left visible. Otherwise, the displayed tape counter
and Function indications are also copied.
[Palmcorder]
1
Insert the recorded Cassette.
[VCR]
2
Insert a blank Cassette with an erasure prevention tab.
lf various settings (such as external input, tape speed, etc.) are
required, please refer to the operating instruction of your VCR.
[Palmcorder]
3
Press the [> ] Button to start playback.
[VCR]
4 Start recording.
5
Press the Pause or Stop Button to stop recording.
([Palmcorder]
6
Press the (™] Button to stop playback.
@ S-VHS Cabie (not supplied)
@ A/V Cable (supplied)
Pt et Pe Pee Pt Pat et at Pah Pret Pp Pat Rd Peat Pend Pre Pot Prat Bid Mads Fan Peat Peat Paap gs Mid at Peet Peat Pe Pop Pag
Copying an S-VHS or VHS Cassette to your DV
Cassette
After connecting the Palmcorder and the S-Video, Video, Audio Output
Jacks (8) of the other equipment as illustrated on the left, start the
following procedures.
® You need the Remote Controller.
lauDio ouT]@) |' [Palmcorder]
:
1
Set [VCR FUNCTIONS} >> [AV IN/OUT SETUP] >> [AV JACK]
>> [IN/OUT].
2
Insert an blank Cassette with an erasure prevention tab.
{Other Equipment]
3
Insert a recorded Cassette and start playback.
[Palmcorder]
4
While pressing the [REC] Button, press the [PLAY] Button.
(Both buttons are located on the Remote Controller.)
&
Press the [11] Button or [@] Button to stop recording.
[Other Equipment]
6
Press the Stop Button to stop playback.
[S-VIDEO in] (A)
@ S-VHS Cable (not supplied)
@ A/V Cable (supplied)
i Analog-Digital Conversion
When the Palmcorder is connected with other digital video equipment
through its DV Terminal, the analog format pictures which have been input
( _®To DV-output analog video signals sent from other equipment, set [DV
OUT] on the [AV IN/OUT SETUP] Sub-Menu to [ON]. (Normaily, keep the
[OV OUT] set to [OFF]. If it is set to [ON], the quality of the image may be
disturbed.)
CAUTION:
copyright infringement.
¢ Please refer to "Recording to a Card from other equipment" (-> 53),
regarding the recording to a Card.
For assistance, please call : 1-800-21 1-PANA(7262) or
send e -mail to : consumerproducts
@ panasonic.com
40
Advertisement
Table of Contents
