Copying On An S-Vhs (Or A Vhs) Cassette - Panasonic NV-GS200 Manual

3
Press the [;] Button
Controller where you want to add new
sound.
MULTI/
¥
REC
P-IN-P
V
/REW PLAY
6 1
STILL ADV PAUSE
E
;
INDEX STOP
K
∫
SELECT
4
Press the [A.DUB] Button
Remote Controller.
5
To start Audio Dubbing, press the [;]
Button (76) on the Remote Controller.
To Cancel Audio Dubbing
Press the [;] Button (76)
Controller.
The Movie Camera is in the Still Playback Mode
again.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
To Dub Audio While Listening to a
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing,
use headphones to listen to the pre-recorded
sound while dubbing the audio. (When using
headphones, set [AV JACK] to [OUT/PHONES].)
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
≥For other notes concerning this item, see
Editing Mode
(76)
on the Remote
T
A.DUB
(62)
W
FF/
W
5
STILL ADV
(76)
D
INDEX P.B. ZOOM
L
(62) on the
on the Remote
.
-121-
Copying on an S-VHS (or a VHS)
Cassette
(Dubbing)
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
[S-VIDEO IN]
2
S-VIDEO
DV
1 AV Cable
2 S-Video Cable
≥Be sure to press the [OSD] Button (
Remote Controller prior to copying so that no
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an
erasure prevention tab.
≥If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
Movie Camera:
3
Press the [1] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop
recording.
Movie Camera:
6
Press the [∫] Button to stop playback.
-106-
[VIDEO IN]
[AUDIO IN]
1
AV IN/OUT
PHONES
IN/OUT
) on the
-66-