Average Speed / Trip Time / Distance Traveled; Date And Time + Satellite Symbol + Waas/Egnos/Msas Symbol - Magellan FX324 MAP Manual

Select Alarm and push Enter to choose the type of alarm that will sound
on the intermediate times and at the end of the countdown. Push Enter
after selecting the desired alarm type.
Select the Start Time and push Enter to enter the total length of the
countdown. Push Enter after entering the length of time.
Select Intermediate 1 and push Enter to enter the countdown length after
the intermediate no. 1 time is reached. Push Enter after entering the
length of time.
Select Intermediate 2 and push Enter to enter the countdown length after
the intermediate no. 2 time is reached. Push Enter after entering the
length of time.
Select the icon and push Enter to begin the countdown.
Select the icon and push Enter to stop the countdown.

Average Speed / Trip Time / Distance Traveled

Your average speed is displayed in the selected unit of measurement. It is
calculated from the Trip Time and the Distance Traveled displayed below.
See Navigation Menu to change the unit of measurement.
To reset the average speed:
Navigation Average Speed
A confirmation message is displayed. Select Yes and push Enter to
confirm that you want to reset the Maximum Speed to zero or select No
and push Enter to cancel.
Note: Resetting the Average Speed also automatically resets the Trip
Time and Distance Traveled.
Date and Time + Satellite Symbol +
WAAS/EGNOS/MSAS Symbol
The date and local time are always displayed. The satellite symbol means
that your FX324 MAP has calculated your position.
Enter
35