13. Using Your Fx324 Map In Dgps Mode; Using The Fx324 Map With A Df300 Mlr Differential Receiver; Connecting The Df300 Receiver; Configuring The Serial Output Port - Magellan FX324 MAP Manual

13. Using Your FX324 MAP in DGPS Mode

This section describes the use of your FX324 MAP with the differential
receiver DF300 MLR or with another type of differential receiver.
Using the FX324 MAP with a DF300 MLR
Differential Receiver.
The DF300 is a differential correction receiver from the MLR range,
designed to be completely controlled from your FX324 MAP.

Connecting the DF300 Receiver

Your FX324 MAP has a digital input to which you can connect an external
differential receiver. You should follow the following connection table:
Description
FX324 MAP
0 volts
+ 10 to 36 volts DC
RS422 Reference
RS422 Output
RS232 Reference
RS232 Input

Configuring the Serial Output Port

In order to control the functioning of the DF300 from your FX324 MAP, the
serial output port must be in NMEA 183 1.5 or NMEA 183 2.0 or NMEA
183 2.3 format and the PML2 sentence must be selected for this format.
Menu SETUP Tab
Select NMEA 183 1.5 or NMEA 183 2.0 or NMEA 183 2.3 from the list
and push Enter.
The following screen appears:
80
FX324 MAP Wires
Blue
Red
Orange
Yellow
Green
Black
3–Serial Output
DF300 Receiver Wires
Blue
Red
Yellow
Green
Black
White