Electrical Connections
Wiring Diagram
Caution:
≥ Be sure to connect the power connector after completion of all other connections
for prevention of shortings.
Example Combination
≥ Color LCD TV monitor (CY-TV7200W)
≥ External amplifier for center speaker
≥ External amplifier for subwoofer
≥ Center speaker (EAB-CF2)
≥ Subwoofer (CJ-SFW300D)
To the auto antenna control
power lead of the car. (Max. 100 mA)
This lead is not intended for use with a switch actuated power antenna.
≥
In future use
To an external amplifier.
(Max. 100 mA)
In future use
To ACC power, 12 V DC.
To the car battery,
continuous 12 V DC.
Connect the battery power cord to a connector that is always supplied with power from the car battery.
≥
To a clean, bare metallic
part of the car chassis.
66
CQ-D7400W
Not used
(Green/Yellow Stripe)
Changer Control Cord
Antenna
Motor Antenna Relay Control Lead
Dual CD changer Control Lead
External Amplifier Control Power Lead
Navi Mute Lead
ACC Power Lead
Battery Lead
Ground Lead
VIDEO-CONT
CQ-D7400W
Antenna terminal
Connect the radio antenna.
ANT-CONT MAX0.1A
TWIN CD
C-CONT
•
AMP-CONT MAX0.1A
NAVI MUTE
Resistor (220 Ω)
ACC
Fuse (10 A)
BATTERY 10 A
(Yellow)
(Black)
VIDEO-OUT
Video Output
(Yellow)
Cord
AUX-IN
AUX Input Cord
Pre Out Cord
(Front)
Pre Out Cord
(Rear)
Power connector
(Dark Blue)
(Brown/White Stripe)
(Blue/White Stripe)
(Orange)
(Red)