CONNECTIONS
CAUTION:
Inproper connection of accessories (or connection to incompatible equipment) may damage your unit. All connections should
be made with the power supply unplugged.
[
7
]
| CONNECTION OF OUTDOOR UNIT
• Insert the 25 PIN connector of the power supply [CRD-4500P], to the connector terminal located on the rear panel of
the satellite receiver (CRD-4500R) and tighten the locking screws.
• Connect LNB down converter to the receiver and connect the polarizer and actuator to power supply.
■ HALL SENSOR AND OPTICAL TYPE ACTUATOR
■ REED SWITCH TYPE ACTUATOR
-
11
-