Meaning Of Symbols; Control Unit - Panasonic CQ-D7400W Operating Instructions Manual

Meaning of Symbols

This manual uses its own form of illustrations and methods
of description to indicate the operating procedures and provide
information.
In each section, the main operations are
described inside this box.
Start reading here if you want to use the
product immediately.
Common Operations
MUTE
DISP (Display)
VOLUME
PWR (Power), SOURCE
PWR
(Power),
SOURCE
CAR DVD PLAYER / RECEIVER CAR DVD PLAYER / RECEIVER
Display
Change
16
CQ-D7400W
Various functions other than the main
functions in the above-mentioned box
are described here.
Read this area to learn how to get the
most out of the unit.
10
CQ-D7400W
Preparation:
Turn the car's ignition switch ACC or ON.
≥
Turn the monitor switch to ON.
≥
Check the monitor connection setting. (page 67)
≥
Power [PWR]
ON: OFF:
Note:
When the power is switched on for the first time, a
≥
demonstration display appears.
To cancel the demonstration display
VOL (Volume)
MUTE
To display the demonstration again
[when the power is off]
4 sec.
When the power is ON
Regular mode Folder layer (MP3 only) Regular mode r Background
Display off* Clock (24-hour system) Background
When the power is OFF
Note:
Clock display Display off
≥
displayed when the
clock is not adjusted.
There are five kinds of
≥
* Not only the display area, but also the lighting is turned
background displays.
off. In addition, when a valid button is pressed while
It can be selected in
the lighting is off, the lighting and the display turn on
PICTURE mode. (page 50)
and then turn off again after approximately 5 seconds.
SOURCE
Radio (AM/FM)
(Ex. FM)
2 sec.
Disc (DVD/Video CD/CD/MP3)
(Ex. DVD)
CD changer
(When a CD changer
is connected.)
AUX (Auxiliary source)
(Auxiliary source)
Decreasing volume range is adjustable by setting. (page 48)
Mute/
Attenuation
will be
Operations with neither mark can be
performed either directly on the
main unit or using the remote

control unit.

Indicates pressing a button.
Indicates pressing a button
for an extended period of time.
2 sec.
VOLUME [VOL "#]
DOWN UP
Default: j40 dB
Setting range: j82 dB to 0 dB
Note:
The sound level for each source is stored in the
≥
memory. (There is one volume setting for AM
radio band and one volume setting for FM radio
band.)
No sound.
Decrease the volume by j20 dB.
CQ-D7400W
This can only be controlled
through the main unit.
This can only be controlled
through the remote control
unit.
17