Connecting The Power Supply; Timer Play - Marantz SA-1152 User Manual

This unit can perform timer play by cooperating with your
audio timer.
Connect this unit's power cord to the audio timer's power
socket and the timer's power cord to power outlet.
For connection to audio timer and it's operation, please refer
to the instruction manual of your audio timer.
Audio Timer
@
ACIN
"'"
c€[:;)
f
&
[,--C_O~N~NE--,-,C--,-,TI_ON~S_"",_---'--'-'-'~"~~'
' _ ___. '
""'~'~'"
' - - L . : . ; ": : . : : : : . . . : . . . - - - - , - - , - , - - - , - - '
"'---:::...-~~.:...-..;;.J
I
1.
Connect the audio cable
CD
to this unit's front speaker (
TIMER PLAY
J
outputs and the stereo inputs on your amplifier, receiver
'--------------------~
or stereo system.
2.
Connect the optical cable
ev,
coaxial cable Q) to the digital
input on your AV amplifier, D/A converter, CD-R, etc..
• Signal will be output from the digital audio out jacks
(OPT/COAX.) only when an Audio CD disc is played. No
signal is output when playing a Super Audio CD.
3.
When connecting to an external master clock generator,
use the BNC terminal coaxial cable (75Q)
®.
Note:
Signals are output from the DIGITAL OUTPUTS
connector (OPT., COAX.) only when an audio CD is
being played. No signal is output when playing a super
audio CD.
( CONNECTING THE POWER SUPPLY
1 Plug the power cable into AC IN jack on the back panel.
Setting method of Timer Play
CD
Press POWER switch to turn ON the power.
ev
Insert the disc to be played.
• In timer play mode, tracks are played normally.
Q) Set the audio timer.
2 Turn on the power switch of the audio unit (amplifier, etc.)
that is connected with this unit. Set the selector on the
connected unit to this unit.
3 Plug the power cable into an AC outlet.
13