Table of Contents
Advertisement
Connecting the power supply
1
Plug the power cable into AC IN.
2
Plug the male end of the cord into the mains.
Note: As long as this player is connected to mains, it still
keeps loosing the power. Please plug off the AC cord if you
want to save the electricity fee.
Infrared remote control
Loading the batteries
1
Open the battery compartment cover.
2
Insert two 'AAA' (R-03) batteries as indicated inside
the battery compartment.
3
Close the cover.
Caution: Do not use old and new batteries
together. Also never use different types of
batteries together(standard, alkaline, etc.)
Remote control
Operate the remote control unit (RC-12SAS1) within a
distance of approx. 5 m from the infrared signal
reception window (remote sensor) on the front of the
SACD player.
Remote control operation may not be possible if the
remote control unit's transmitter is not pointing in the
direction of the remote sensor or if there is an
obstruction between the transmitter and the remote
sensor.
Remote control operating range
SA-12S1
Remote control unit RC-12SAS1
15
Advertisement
Table of Contents
