Memory Capacity; Using Direct Commands - Panasonic KX-TCD560 Operating Instructions Manual

Answering System Features (KX-TCD580 only)
4
Select "Record Memo", then press
,.
L Hold the handset about 20 cm away
and speak clearly into the microphone.
5
Press Z to stop recording.
6
Press {ih}.
Note:
L Voice memos are treated as new
messages.

Memory capacity

The total recording capacity (including your
greeting message, caller messages, voice
memos, audible call announcements, and
recorded conversations) is about 30
minutes. A maximum of 64 messages can
be recorded.
L If message memory becomes full, "Full"
is displayed. To record additional
messages, you will need to erase
unnecessary messages.
L Messages are retained even if a power
failure occurs.
44
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333

Using direct commands

You can operate the answering system by
pressing dial keys, rather than navigating
through the menus. To use the following
commands, press $ (centre of joystick),
select K, then press ,.
Key Direct commands
Repeat message (during
{1}
playback)
Skip message (during
{2}
playback)
Enter the "Setting TAM"
{3}
menu
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record memo message
{7}{4}
Record greeting message
{7}{6}
Turn answering system on
{8}
Stop (recording, playback)
{9}
Turn answering system off
{0}
Erase this message (during
{*}{4}
playback)
Erase all messages
{*}{5}
Erase greeting message
{*}{6}
*1 If pressed within the first 5 seconds of
a message, the previous message will
be played.
*1