Sms (Short Message Service); Sending A Message - Panasonic KX-TCD560 Operating Instructions Manual

Optional Telephone Services
SMS (Short Message
Service)
SMS allows you to send and receive text
messages between other fixed-line and
mobile phones that support compatible SMS
networks and features.
Important:
L SMS features are available only after
subscribing to Caller ID service. Consult
your service provider for details and
availability.
Note:
L A total of 69 messages (at 80
characters/message) can be saved.
L If the unit is connected to a PBX system,
you may not be able to use SMS features.

Sending a message

Writing and sending a new
message
1
Press $ (centre of joystick).
2
Select }, then press ,.
3
Select "Create", then press ,.
L To use the text from the last message
you created, push the joystick up
when "^ Use Last Text?" is
displayed.
4
Enter the message (page 40), then
press ,.
5
Enter the destination phone number (20
digits max.), then press ,.
L To send the message to a party saved
in the handset phonebook, press
., select the phonebook entry,
then press , 2 times.
L To send the message to a party logged
in the Caller ID list, push the joystick
36
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
up or down repeatedly to select the
party, then press , 2 times.
L To send the message to a phone
number logged in the redial list, press
- repeatedly to select the phone
number, then press , 2 times.
6
To save the message, select "Yes", then
press ,.
L To send the message without saving it,
select "No", then press ,.
7
To send the message, select "Send",
then press ,.
L To cancel sending, press {ih}.
Note:
L An SMS message may contain up to 160
characters. Consult your SMS service
provider for more information.
L "Invalid Number" is displayed if you try
to send a message to a phone number
saved in the handset phonebook, Caller
ID list, or redial list that is over 20 digits
long.
L When sending a message, "Sending
Message" is displayed momentarily, then
"Transferring Message" is displayed.
L If your phone is connected to a PBX, store
the PBX line access number (page 39).
Sending a saved message
1
Press $ (centre of joystick).
2
Select }, then press ,.
3
Select "Send List", then press ,.
4
To read a saved message, push the
joystick up or down repeatedly to select
the message, then press ,.
L Messages are displayed in
chronological order and by destination
phone number.
5
To send the message, press *,
select "Send", press ,, then
continue from step 5, "Writing and
sending a new message", page 36.