Programming Cooking Time For The Bottom Oven E; Switching The Cooking Process Off Automatically - Miele H 349 B2 Operating Instructions Manual

Using the clock / timer
Programming cooking time for
the bottom oven e
With the timer it is possible for the
bottom oven to be switched off
automatically, or set to come on at a
later time and then also be switched off.
If a cooking process is pre-selected
the time of day appears in the timer
display and the symbols for types of
time entered (f, g, )) flash.
If a cooking process is in progress
the time of day and the symbols for
types of time entered (f, g, ))
appear in the display.
When the end of cooking time has
been reached
– an audible tone sounds for approx. 5
seconds.
– the ")" symbol flashes at the same
time.
^ Press the ")" button.
The audible tone and the symbol are
switched off.
As soon as the ")" button is
pressed and the indicator light for
the "+/–" button goes out, the oven
heating starts again.
Therefore always switch the oven off
when the food is fully cooked.
If the food is not cooked to your taste, a
new cooking time can be entered.
Finally turn the temperature and
function selectors to "0".
22
If the audible tone is not switched off it
will continue to sound at 5 minute
intervals as a reminder that cooking
time as finished. This reminder
continues for up to an hour.
The cooling fan will continue for a while
after switching the oven off.
Switching the cooking process
off automatically
^ Select the required function and
temperature.
^ Press the "g" button.
"0:00" appears in the display.
^ Use the "+" button to enter the
required cooking time in hours :
minutes.
(1 min. – 23 hours. 59 min.)
As soon as the indicator light for the
"+/–" button goes out, the cooking
process starts.
The end of cooking time is
automatically calculated from the time
entered.
As well as the options given, you can
also enter the end of a process only,
using the relevant buttons.