Test Your Scanner - Microtek ScanMaker X12USL Installation Manual

4. Test your scanner

Note: Steps 1 and 2 are for Windows 98 and Windows 95
only, not for Windows NT 4.0.
1. In Windows, click Start, Settings, and select
Control Panel. Double-click the System icon
in Control Panel, then select Device Manager
from the top.
2. Double-click Imaging Device or Microtek
Scanners. Verify that your scanner is listed here.
Click "OK" to close all dialog boxes.
3. In Windows, go to "Start, Programs, Microtek
ScanWizard 5 for Windows", and select
Scanner Test. When started successfully, the
screen below appears.
SCSI Installation on the PC
4. Place your document face down on the scanner
glass, and click on the Flatbed button in the
Microtek ScanTest window.
Top of document faces
front of the scanner.
Detected
5. A preview of your image will be displayed in the
scanner
Microtek ScanTest window. Click OK, and exit
Microtek ScanTest; you are now ready to scan.
Detected
If you encounter problems with the scan test, see
Interface
the digital file SCSI_Troubleshootingpc.pdf in the
Techinfo folder on your Microtek CD-ROM.
Click the
"Flatbed"
button to
preview
4