Receiving A Fax Manually - Auto Answer Off - Panasonic KX-FLB881E Operating Instructions Manual

6. Fax
6.8 Receiving a fax manually –
Auto answer OFF
Important:
L Use this mode with an extension telephone.
6.8.1 Activating TEL mode
1
Make sure feature #404 is set to "TEL" beforehand
(page 55).
2
Press {FAX AUTO ANSWER} repeatedly to display
"TEL MODE".
L The {FAX AUTO ANSWER} indicator turns OFF.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
socket or the same line (extension telephone), you can
use the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation code)
firmly.
3. Replace the handset.
Note:
L To stop receiving, see page 68.
L To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 57) beforehand. The
default setting is ON.
6.8.2 Activating TEL/FAX mode
1
Make sure feature #404 is set to "TEL/FAX"
beforehand (page 55).
44
2
Press {FAX AUTO ANSWER} repeatedly to display
"TEL/FAX MODE".
L The {FAX AUTO ANSWER} indicator turns OFF.
3
The ringer volume setting should be ON (page 18).
How phone calls and faxes are received
1. "INCOMING CALL" will be displayed but the unit will
not ring.
2. The unit will wait for the duration of 2 rings before
answering the call.
L The number of rings is determined by the
"TEL/FAX delayed ring setting" (feature #212
on page 55).
L During this time, an extension telephone will ring.
3. The unit will answer the call and try to detect a fax
calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
{STOP}