General Information; Reference Lists And Reports; Specifications - Panasonic KX-FLB881E Operating Instructions Manual

Flat-bed multifunction laser fax
Hide thumbs Also See for KX-FLB881E:
Table of Contents

Advertisement

13. General Information

13 General Information
Printed Repor ts

13.1 Reference lists and reports

You can print out the following lists and reports for your
reference.
– "SETUP LIST"
– "TEL NO. LIST"
– "JOURNAL REPORT"
– "BROADCAST LIST"
– "PRINTER TEST"
L If the test print has smudges, or blurred points or
lines, clean the inside of the unit (page 85). If
printing quality is still poor, replace the toner
cartridge and drum unit.
– "CALLER ID LIST"
– "PCL FONT LIST"
– "ADDRESS LIST"
1
Press {MENU} repeatedly to display "PRINT
REPORT".
2
Press {<} or {>} repeatedly to display the desired
item.
3
Press {SET} to start printing. i {MENU}
90
{MENU}
{SET} {<}{>}

Specifications

13.2 Specifications
■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Effective printing width:
A4: 202 mm
Letter/Legal: 208 mm
■ Transmission time
*1
Approx. 4 s/page (ECM-MMR Memory transmission)
■ Scanning density:
Scanning resolution:
Up to 600 × 1,200 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
Copy resolution:
Up to 600 × 600 dpi
Fax resolution:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm-in standard resolution,
7.7 lines/mm-in fine/photo resolution,
15.4 lines/mm-in super fine resolution
■ Photo resolution:
64-level
■ Scanner type:
Colour Contact Image Sensor
■ Printer type:
Laser Printer
■ Data compression system:
Modified Huffman (MH), Modified READ (MR), Modified
Modified READ (MMR)
■ Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 /
19,200 / 16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800
/ 2,400 bps; Automatic Fallback
■ Operating environment:
10 °C – 32.5 °C, 20 % – 70 % RH (Relative Humidity)
■ Dimensions:
Approx. height 318 mm × width 440 mm × depth 445 mm
■ Mass (Weight):
Approx. 16 kg
■ Power consumption:
Standby: Approx. 8.0 W
Preheat: Approx. 65 W
Copy: Approx. 380 W
Maximum: Approx. 950 W (When the fuser lamp turns
on)
■ Power supply:
220–240 V AC, 50 Hz
■ Memory capacity
(for operation and storing memory):
32 MB
:
*2

Advertisement

Table of Contents
loading

Table of Contents