Table of Contents
Advertisement
Initial Programming
2.6 Date and time
{FAX}
1
{MENU} i {#}{1}{0}{1} i {SET}
2
Enter the current date/month/year/hour/minute by
selecting 2 digits for each. Press {*} repeatedly to
select "AM" or "PM", or 24-hour time entry.
Example: 10 August, 2007 10:15 PM (12 hour
clock format)
1. Press {1}{0} {0}{8} {0}{7} {1}{0} {1}{5}.
2. Press {*} repeatedly to select "PM".
3
{SET}
4
Press {MENU} to exit.
Note:
L The other party's fax machine will print the date and
time on the top of each page you send according to
your unit's date and time setting.
L After setting the date and time, if the unit is in the
copy mode, change it to the fax mode by pressing
{FAX}. You can check your unit's date and time
setting on the display.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
L If the time has not previously been set, Caller ID will
not adjust the clock.
{MENU}
{SET}
{<}{>}
D:|
0 1/M:01/Y:07
TIME: 00:00
D:|
1 0/M:08/Y:07
TIME: 10:15
2.7 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1
{MENU} i {#}{1}{0}{2} i {SET}
2
Enter your logo, up to 30 characters (see page 66 for
character entry). i {SET}
3
Press {MENU} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
character, and make the correction.
L To erase all characters, press and hold {STOP}.
2. Preparation
{MENU}
{SET}
{<}{>}
{STOP}
LOGO=|
19
Advertisement
Table of Contents
