2. Preparation
2.2 Selecting the operation mode
(Fax/Copy/Scan)
You can select the desired mode by pressing one of the
following buttons.
– {FAX}: Select this mode when using the unit as a fax
machine (page 37).
– {COPY}: Select this mode when using the unit as a
copier (page 32).
– {SCAN}: Select this mode when using the unit as a
scanner for the computer (page 29).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 54) and the timer before returning to
the default operation mode (feature #464 on page
54).
16
Document Requirements
2.3 Setting the original
2.3.1 Using the scanner glass
1
Open the document cover (1).
2
Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the l mark points.
3
Close the document cover.
Note:
L Confirm that there are no documents in the auto
document feeder.
L Place the original onto the scanner glass gently and
do not press down too firmly to avoid malfunction.
L If the original is a thick book, do not close the
document cover.
L Check that the ink, paste or correction fluid has dried
completely.
L Effective scanning area is as follows:
Effective scanning area
L Shaded area will be scanned.
289 mm
4 mm
1
2
4 mm
208 mm
4 mm
4 mm