Table of Contents
Advertisement
Feature/Code
Setting the font pitch/point in
PCL
{#}{7}{7}{0}
Setting the symbol set in PCL
{#}{7}{7}{1}
Setting the line breaks in PCL
{#}{7}{7}{2}
Setting the waiting time for
auto continue mode
{#}{7}{7}{3}
Changing the data timeout
setting
{#}{7}{7}{4}
Selection
To set the font pitch/point to be used in PCL printing.
1. {MENU} i {#}{7}{7}{0} i {SET}
2. Enter the font pitch from "00.44" to "99.99", or the point from "004.00"
to "999.75", using the dial keypad.
L The default pitch is "10.00" and the default point is "012.00".
3. {SET} i {MENU}
To set the symbol set to be used in PCL printing.
1. {MENU} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {SET}
i {MENU}
To set each behaviour when receiving CR, LF, and FF codes.
{1} "CR/LF/FF" (default): CR=CR, LF=LF, FF=FF
{2} "CR+LF/LF/FF": CR=CR+LF, LF=LF, FF=FF
{3} "CR/CR+LF/CR+FF": CR=CR, LF=CR+LF, FF=CR+FF
To set the length of time before the unit recovers if memory overflow occurs.
{1} "OFF" (default): Deactivates this feature.
{2} "20s": 20 seconds
{3} "30s": 30 seconds
{4} "60s": 60 seconds
{5} "90s": 90 seconds
{6} "120s": 120 seconds
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {MENU} i {#}{7}{7}{4} i {SET}
2. Enter the desired data timeout setting from "005" seconds to "600"
seconds, using the dial keypad.
L The default setting is "060" seconds.
3. {SET} i {MENU}
8. Programmable Features
61
Advertisement
Table of Contents
