Fax / Tel Auto Switching Mode; Setting The Fax / Tel Auto Switching Mode; Operation Of Fax / Tel Auto Switching Mode - Panasonic Panafax UF-585 User Manual

Receiving Documents

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice communication
automatically.

Setting the Fax / Tel Auto Switching Mode

1
Change Fax Parameter No. 15 (IN MODE) to 2 : Fax / Tel SW. (See page 37)
2
OUT
Confirm that the display is as shown to the right.

Operation of Fax / Tel Auto Switching Mode

1
Your machine will answer the call when a call is received, then distinguish whether it is
a voice or fax call.
If it is a Fax call,
2a
Your machine begins to receive the
documents.
(see Note 1) (see Note 2)
Note:
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL TIMER) (see page 38).
2. To adjust the Ringer Volume refer to page 25.
64
MAR-12-1999 15:00
RCV MODE=FAX/TEL 00%
If it is a Voice call,
2b
Your machine begins to signal (ringing)
through the machine's speaker for your
attention. (See Note 1)
3b
Lift the handset of the External Telephone
and press
STOP
4b
Begin the conversation.
.