Battery Installation; Battery Charge - Panasonic KX-TCD200E Operating Instructions Manual

TCD200E(e-e).book Page 9 Wednesday, February 9, 2005 2:58 PM
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L The unit will not work during a power
failure. We therefore recommend you also
connect a standard telephone to the same
telephone line using a T-adaptor. Your
Panasonic sales shop can offer you more
information about connection possibilities.

Battery installation

1
Insert the batteries negative (T)
terminal first.
2
Close the handset cover.
Note:
L Use only rechargeable batteries (page 5).

Battery charge

Place the handset on the base unit for
about 7 hours before initial use.
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
Note:
L It is normal for the handset to feel warm
during charging.
L It takes 7 hours to fully charge the
batteries, however, you can use the
handset before the batteries are fully
charged.
L Clean the charge contacts (page 7) of the
handset and base unit with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
Battery strength
Battery icon Battery strength
High
5
Medium
6
Low
7
When flashing: Needs
to be charged.
Preparation
9