Answering Calls - Panasonic KX-TCD200E Operating Instructions Manual

TCD200E(e-e).book Page 14 Wednesday, February 9, 2005 2:58 PM
Making/Answering Calls
2
Press {R}.
3
Dial the phone number, then press {C}
or {s}.
Note:
L Pressing {R} 1 time creates 1 pause.
Press {R} repeatedly to create longer
pauses. To change pause length, see
page 26.

Answering calls

1
Lift the handset and press {C} or {s}
when the unit rings.
L You can also answer a call by pressing
any dial key from {0} to {9}, {*}, {#},
or {INT}. (Any key answer feature)
2
When finished talking, press {ih} or
place the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not need to
press {C}. To turn this feature on, see
page 22.
To adjust the ringer volume when an
outside call comes in
Press {e} or {v} when an outside call
comes in.
Note:
L The ringer volume cannot be adjusted if
the handset is on the base unit.
Other features
Handset locator
Using this feature, you can locate the
handset if it has been misplaced.
1
Press {x} on the base unit.
L The base unit will page the handset
for about 1 minute.
14 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
2
To stop paging, press {x} on the base
unit or press {ih} on the handset.