Other Features - Panasonic KX-TCD200E Operating Instructions Manual

TCD200E(e-e).book Page 13 Wednesday, February 9, 2005 2:58 PM
4
Select "Yes", then press {>}.
5
Press {ih}.
To store a number from the redial list into
the phonebook
1
Press {R}.
2
Press {e} or {v} repeatedly to select
the desired number, then press
{j/OK}.
3
Select "Add Phonebook", then press
{>}.
4
Enter a name (16 characters max.; see
page 36 for character entry), then press
{j/OK}.
5
Edit the phone number if necessary,
then press {j/OK}.
6
Select the desired category (page 15),
then press {>}.
7
Select "Save", then press {>}.
8
Press {ih}.

Other features

Voice enhancer
You can change the tone quality of the
receiver while you are on a call. 3 settings
are available.
1
Press {j/OK} during a call.
2
Select the desired setting, then press
{>}.
Note:
L If you select "High Tone" or "Low
Tone", "[VE]" is displayed.
Mute
You can mute your voice during a
conversation. While mute is turned on, you
will be able to hear the other party, but the
other party will not be able to hear you.
1
To mute your voice, press {C/T}.
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Making/Answering Calls
2
To return to the conversation, press
{C/T} again.
Key lock
The handset can be locked so that no calls
or settings can be made. Incoming calls can
be answered, but all other functions are
disabled while key lock is on.
To turn key lock on, press {j/OK} for about
2 seconds.
L "[X]" is displayed.
L To turn key lock off, press {j/OK} for
about 2 seconds.
Note:
L Calls to emergency numbers (page 26)
cannot be made until key lock is turned
off.
L Key lock is turned off when the handset is
turned off.
Call waiting - {R} button
If a second call is received while in
conversation with the first caller, a beep tone
will be heard. Press {R} button to switch
between callers.
This service requires a subscription, consult
your service provider for details.
Note:
L If your unit is connected to a PBX (private
branch exchange), pressing {R} can allow
you to access certain features of your host
PBX such as transferring an extension
call. Consult your PBX dealer for details.
L You can change the recall time (page 26).
Pause button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
Example: If you have to dial {0} before
dialling outside numbers manually, you will
probably pause after dialling {0} until you
hear a dial tone.
1
Press {0}.
13