Konica Minolta BIZHUB C450P User Manual page 89

Setting up the printer driver
– Default Gateway: Specify the default gateway address connecting
to a network.
6
To apply the settings, restart this machine (turn it off, then on again).
Turn this machine back on to apply the IP address.
!
Detail
Although the IP address is entered without using the DHCP server in the
procedure described here, it is also possible to automatically assign the
IP address from the DHCP server. When "DHCP Setting" is set to "Ena-
ble", the IP address, subnet mask, and gateway address settings are au-
tomatically assigned from the DHCP server on the network, so it is not
necessary to assign them manually. However, note the following when
setting "DHCP Setting" to "Enable".
Check with the network administrator that the DHCP server exists. If the
DHCP server does not exist, be sure to specify settings for "IP Address",
"Subnet Mask", and "Default Gateway".
If the settings for the IP address and other items have been assigned us-
ing the DHCP server, there is a possibility that they may be automatically
changed. When the settings for the IP address and other items are
changed, if the IP address has been used to specify a printer on the net-
C450P
2
2-31