Paper Take-Up Roller; Electrostatic Charger - Konica Minolta BIZHUB C450P User Manual

7
Reminder
Pressing too hard on a key in the control panel may damage it. In addi-
tion, never use a mild household detergent, glass cleaner, benzene or
thinner to clean the control panel.

Paper take-up roller

% Clean the paper take-up rollers by
wiping them with a soft, dry cloth.
Reminder
Never use solvents, such as benzene or thinner, to clean the prints take-
up roller.

Electrostatic charger

If the electrostatic charger is dirty, streaks will appear though the prints. If
this occurs, follow the procedure described below to clean the charger.
1
Open the machine's front door.
2
Slowly pull out the charger-cleaning
tool as far as possible. Next, slowly
push in the charger-cleaning tool as
much as possible. Repeat the above
operations three times.
– Perform this same operation to
clean each of the other electro-
static chargers.
3
Securely insert each charger-cleaning tool, and then close the front
door.
7-4
Maintenance
C450P