2
For Windows Me/2000
1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn on the computer.
–
Do not disconnect or connect the cable while the computer is start-
ing up.
2
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
–
Konica Minolta PCL driver: User Software CD-ROM
–
Konica Minolta PostScript driver: PostScript Printer Driver CD-
ROM
3
Turn this machine on.
–
The Add New Hardware Wizard starts up.
4
Select "Search for a suitable driver for my device (recommended)" (for
Windows Me, select "Automatic search for a better driver (Recom-
mended)"), and then click the [Next] button.
5
For Windows 2000, select "Specify a location", and then click the
[Next] button.
For Windows Me, select "Specify a Location", and then click the
[Browse] button.
6
Depending on the operating system and printer driver that you are us-
ing, specify the folder on the CD-ROM that contains the printer driver,
and then click the [OK] button.
–
For Windows Me
Konica Minolta PCL driver: Folder at Driver\Drivers on the User
Software CD-ROM
PostScript PPD driver: Folder at Driver\Drivers on the PostScript
Printer Driver CD-ROM
–
For Windows 2000
Konica Minolta PCL driver: Folder at Driver\Drivers on the User
Software CD-ROM
Konica Minolta PostScript driver: Folder at Driver\Drivers on the
PostScript Printer Driver CD-ROM
7
Click the [OK] button (for Windows Me, click the [Next] button), and
then follow the on-screen instructions.
8
Click the [Finish] button.
2-14
Setting up the printer driver
C450P