For Windows Xp/Server 2003 - Konica Minolta BIZHUB C450P User Manual

2

For Windows XP/Server 2003

1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
– Konica Minolta PCL driver: User Software CD-ROM
– Konica Minolta PostScript driver: PostScript Printer Driver CD-
ROM
3
Turn this machine on.
The Add New Hardware Wizard starts up.
4
Select "Install from a list or specific location (Advanced)", and then
click the [Next] button.
5
Under "Search for the best driver in these locations", select "Include
this location in the search", and then click the [Browse] button.
6
Depending on the operating system and printer driver that you are us-
ing, specify the folder on the CD-ROM that contains the printer driver,
and then click the [OK] button.
– Konica Minolta PCL driver: Folder at Driver\Drivers on the User
Software CD-ROM
– Konica Minolta PostScript driver: Folder at Driver\Drivers on the
PostScript Printer Driver CD-ROM
7
Click the [Next] button, and then follow the on-screen instructions.
– When the Digital Signature message appears, click the [Continue]
button.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed
printer appears in the Printers and Faxes window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
2-16
Setting up the printer driver
C450P