Troubleshooting
13
Swing open the shutter of the staple
cartridge.
14
Pull out toward you the two staples
jammed at the end of the staple
cartridge.
What happens if two staples are
?
not removed?
% Stapling cannot continue
correctly.
15
Return the shutter of the staple cartridge to its original position.
16
Insert the staple cartridge holder,
making sure the tabs on the holder
slide along the rails in the
compartment.
17
Insert the staple cartridge holder until
it locks into place.
–
Check that the staple cartridge
holder is securely installed.
bizhub C450P (Phase 3)
9
9-39