For Mac Os X; For Mac Os 9.2 - Konica Minolta BIZHUB C450P User Manual

Setting up the printer driver

For Mac OS X

After connecting this machine to a Macintosh computer, it can be used as a
printer by selecting it in Print Center or the Printer Setup Utility as the printer
to be used.
1
Open Print Center or Printer Setup Utility, located in "Applications"—
"Utilities" of "Hard Disk".
2
When the Add Printer dialog box appears, click the [Add] button. When
the printer list appears, click the [Add] button.
– For Mac OS X 10.4, proceed to step 3.
– For Mac OS X 10.2 and Mac OS X 10.3, proceed to step 4.
– If usable printers have already been set up, the Add Printer dialog
box does not appear.
3
If this machine appears as a printer of a Bonjour connection, select
"KONICA MINOLTA" from the "Print Using" drop-down list, select
"KONICA MINOLTA C450 PS(P)" in the model list, and then click the
[Add] button.
– If the selected printer is registered in the printer list, this completes
the setting procedure.
– When connecting with AppleTalk and this machine does not appear
as a printer, click the [More Printers] button, and then proceed to
step 4.
4
Select the applicable connection method and printer name.
– To specify an AppleTalk zone for an AppleTalk connection, select
"Local AppleTalk Zone".
– When "IPP" is selected as the protocol in IP Printer, the text box for
entering the queue name appears.
For Mac OS 10.3, leave the queue name text box empty.
For Mac OS 10.4, enter "ipp" in the queue name text box.
5
Select "KONICA MINOLTA" from the "Printer Model" drop-down list.
6
Select "KONICA MINOLTA C450 PS(P)", and then click the [Add]
button.
The selected printer is registered in the printer list.
bizhub C450P (Phase 3)
3
3-23