Automatic Paper-Tray-Switching Feature; Order For Selecting The Paper Trays - Konica Minolta BIZHUB C450P User Manual

Loading copy paper

Automatic paper-tray-switching feature

If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional LCT is installed, a maximum of 3,400 pages (with A4 v paper) can
be made continuously. (The paper tray is automatically switched only if the
"ATS Permission" parameter in the Utility mode is set to "Permit".)
Operating conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- Paper trays that are selected when the paper tray is automatically
switched.
!
Detail
For details on the specifying the paper trays that are selected when the
paper tray is automatically switched, refer to "User Setting" on
page 5-34.

Order for selecting the paper trays

As a factory default, when a different paper tray is automatically selected, the
next paper drawer in the following list is chosen.
Tray 2% Tray 3 % Tray 4 % Tray 1
!
Detail
To change the order in which the paper trays are selected, refer to "User
Setting" on page 5-34.
bizhub C450P (Phase 3)
6
6-9