Transmission To The Smb Server - Konica Minolta BIZHUB PRO 1050 User Manual

6
6.5

Transmission to the SMB server

When you send the scanned data to an SMB server, necessary procedures
depend on whether the SMB server is registered in advance or it is input
manually.
When an SMB server is Already Registered
1
Select the [SCAN] tab.
The Select Destinations/Storage Lo-
cations screen appears.
2
Press the [SMB] key.
In the initial settings, the Select Des-
tinations/Storage Locations screen
(E-Mail) is displayed. For information
on the initial settings of the SCAN
tab, contact your administrator of the
copier.
3
Press the Name of the destination
SMB server.
!
Details
You can refine the registered destina-
tion by the search function. For more
information on how to search, refer to
"How to Search" on page 3-9.
You can refine the Name by the search function. For more information on
the search function, refer to "The keys on the Select Destinations/Stor-
age Locations Screen" on page 6-3.
To deselect the Name, press the selected Name again.
If you input a destination manually, refer to "When an E-Mail Address is
Input Manually" on page 6-9.
6-24
Using the Network Scanner Features
bizhub PRO 1050 Scanner