Konica Minolta BIZHUB 350 User Manual page 274

9
5
Select the communication mode, and then click [Next].
– If mode 476 of the software switch settings was changed, only
communication modes that can be selected appear. For details,
refer to "Specifying software switch settings (machine functions)"
on page 10-28.
6
Specify settings for the parameters in the page for the selected
communication mode.
– To also register the secondary recipient, specify settings for the
parameters, and then click [Sub Address Registration].
– For details on the parameters, refer to "One-Touch Key Registration
(User mode)" on page 9-14.
7
Click [Apply].
The one-touch dial destination is registered.
9-24
Specifying settings using PageScope Web Connection
bizhub 350/250 (Phase 2.5)