5
Specifying the transmission report printing conditions
You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing condition.
Settings can be specified for the following.
Item
Default
ON
If TX Fails
OFF
To specify the transmission report printing conditions
1
Touch [Menu].
–
If the optional fax kit has been
installed, touch [FAX Menu].
2
Touch [Setting 1], then [TX Report].
–
If the optional fax kit has been
installed, touch [Set 1], then [TX
Report].
5-14
Description
Displays the printing conditions specified in the Administrator
Management screen.
Prints regardless of the results.
Prints when the transmission failed.
Does not print regardless of the results.
Scan to FTP
bizhub 350/250 (Phase 2.5)