Konica Minolta BIZHUB 500 User Manual page 70

2
Setting], and then touch the key for the
desired position.
Touch [Auto] to automatically determine the
stapling or hole-punching position according
to the orientation of the loaded original. The
paper is stapled or holes are punched along
the long side of the paper if the original length
is 297 mm or less or along the short side of
the paper if the original length is more than
297 mm.
3
Touch [OK] in each screen.
The Basic Screen will be displayed.
2-34
Using copy functions
bizhub 500/420 (Phase 2)