Specifying A Zoom Setting - Konica Minolta BIZHUB 500 User Manual

Using copy functions
2.4

Specifying a Zoom setting

The zoom ratio can be set in order to make a copy on
paper with a size different than the original or to enlarge
or reduce the size of the copy image.
The zoom ratio can be specified in any of the following
ways.
Setting
*1
Auto Zoom
Full size ("×1.0") A copy that is the same size as the document
Enlarge settings The most suitable enlargement zoom ratios
Reduce
*2
settings
*2*3
Set Zoom
XY Zoom
bizhub 500/420 (Phase 2)
Description
The most appropriate zoom ratio is
automatically selected based on the size of
the loaded original and the specified paper
size.
(×1.000) is produced.
for copying from common standard original
sizes to standard paper sizes are preset.
The most suitable reduction zoom ratios for
copying from common standard original
sizes to standard paper sizes are preset.
Programmed zoom ratios can be recalled to
be used again for copying.
By using the keypad, a zoom ratio between
×0.250 and ×4.000 can be typed in directly
without changing the height-to-width ratio.
2
2-19