Transmission To A Group - Konica Minolta BIZHUB PRO 1050 User Manual

Using the Network Scanner Features
6.6

Transmission to a Group

To send the scanned data to a registered Group, follow the steps below.
!
Details
For more information on how to register a Group, refer to "Registering a
Group" on page 5-17.
1
Select the [SCAN] tab.
2
Press the [Group] key.
In the initial settings, the Select Des-
tinations/Storage Locations screen
(E-Mail) is displayed. For information
on the initial settings of the SCAN
tab, contact your administrator of the
copier.
3
Press the Name of the destination
Group.
!
Details
To deselect the Name, press the se-
lected Name again.
- Press the [List] key and then
press the [Group] key to display the list of registered destinations.
- Press the [Edit] key on this screen to change what to include in a
Group.
- The group which has been selected as the destination cannot be
selected.
bizhub PRO 1050e Scanner
6
6-29