Edit Marked Point; Vehicle Position - Panasonic CN-DV1800EN Operating Instructions Manual

Edit Marked Point

Edit
Here you can edit previously marked points by
making the changes listed below. For operating
procedures and detailed descriptions, see the
referenced pages.
• Renaming a Marked Point (a page 45)
• Changing a Marked Point Icon (a page 44)
• Deleting a Marked Point (a page 46)
Display Icon
This lets you choose to have the icon displayed on the map or not.
• [On]: icons are displayed.
• [Off]: icons are not displayed.
Default : On

Vehicle Position

Here you can move the current vehicle position indicator to any point on
the map display.
Important Note:
Normally, this operation is not necessary. Use this function only when the
actual position of your vehicle differs from its position on the map. This
would be the case, for example, after having installed a navigation system
previously installed in another car.
54
Select [Vehicle Position] and press
ENTER.
a The current position map is dis-
played.
Vehicle Position
Move the cursor to the position where
you currently are, and press ENTER.
Vehicle Direction
The Vehicle Position Mark rotates
when tilting the joystick horizontally.
a: 11.25 degrees clockwise
b: 11.25 degrees counterclockwise
* 90 degrees at 8 times and 180 degrees at 16 times.