Table of Contents
Advertisement
Checking GPS Satellite Reception
Press SET UP to open the [Setup Menu].
On the [Setup Menu], select [System Information]
by moving the joystick, and press ENTER.
On the [Setup Menu - Information] menu, select
[GPS], and press ENTER.
a The [GPS Information] menu opens with the
following information:
• Satellite number
• Latitude and longitude of the
current position
• Current date and time
Press POS to return to the map display.
Important Notes:
• After the system has been installed in the vehicle, it takes about 30 min-
utes until satisfactory GPS signal reception is established.
• Check GPS reception in an open area location.
Operating the System While Driving
When you attempt to operate the system while driving, a warning prohibiting opera-
tion is displayed. You can inhibit this message if you wish. Note though that
Panasonic cannot be responsible for any resulting accidents.
Any operation performed while driving, other than
the POS button operation, will cause the mes-
sage
WARNING
Press ENTER.
a The warning is inhibited, and you can operate the system.
* When the display returns to the Current Position Map after the opera-
WARNING
tion,
Repeat the above procedure every time you want to operate the sys-
tem while driving.
Mode
If the monitor is switched to external input while the navigation system is in opera-
tion, the screen background color may change to black.
In this case, press MODE to switch the mode to NAV.
to be displayed.
will be displayed again.
ENTER
ENTER
ENTER
21
Advertisement
Table of Contents
