Panasonic KX-TCD220G Operating Instructions Manual page 45

TCD220G(e-g).book Page 45 Thursday, January 20, 2005 11:43 AM
3
Follow the voice guidance prompts as
necessary.
Hinweis:
L You can hang up at any time.
L You can ignore the voice guidance and control
the unit using remote commands (Seite 45).
Voice guidance
During remote operation, the unit's voice
guidance will prompt you to press {1} to perform
a specific operation, or press {2} to listen to more
available operations. Operations are presented
by voice guidance in the following order:
– Play back all messages
– Play back new messages
– Record a message
– Erase all messages
– Record your greeting message
Hinweis:
L If less than 5 minutes of recording time is
available, the unit will announce the remaining
recording time after the last message is played
back.
L If message memory is full, erase unnecessary
messages (Seite 45).
Answering System Features
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Remote command
Repeat message (during
{1}
*1
playback)
Skip message (during playback)
{2}
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting message
{7}
Stop (recording, playback)
{9}
Turn answering system off
{0}
Erase this message (during
{*}{4}
playback)
Erase all messages
{*}{5}
Erase greeting message (during
{*}{6}
greeting message playback)
End remote operation (or hang
{*}{#}
up)
*1 If pressed within the first 5 seconds of a
message, the previous message will be
played.
Turning on the answering system
remotely
If the answering system is off, you can turn it on
remotely.
1
Dial your phone number from a touch tone
phone.
2
Let the phone ring 10 times.
L A long beep will be heard.
3
Enter your remote access code within 10
seconds of the long beep.
L The greeting message is played back.
L You can hang up, or enter your remote
access code again and begin remote
operation.
45