Panasonic KX-TCD220G Operating Instructions Manual page 22

TCD220G(e-g).book Page 22 Thursday, January 20, 2005 11:43 AM
Handset Settings
sleeping. Night mode can be set independently
for the handset and the base unit (Seite 26).
Using the handset phonebook's category feature
(Seite 14), you can also select categories of
callers whose calls will override night mode and
ring the handset (Caller ID subscribers only).
Set the date and time beforehand (Seite 10).
Hinweis:
L When the call screening feature is on and the
base unit answers a call, the greeting message
and caller's messages will be heard from the
handset speaker even if the night mode setting
is on.
Setting the start and end time for night mode
1
Press {j/OK}.
2
Select "Mobilteileinst.", then press
{>}.
3
Select "Ruftoneinstell.", then press
{>}.
4
Select "Nachtmodus", then press {>}.
5
Select "Start/Ende", then press {>}.
6
Enter the desired hour and minute you wish
to start this feature by selecting 2 digits for
each.
L If you use 12-hour time entry, select "AM"
or "PM" by pressing {*} repeatedly
before entering the time.
7
Enter the desired hour and minute you wish
to end this feature by selecting 2 digits for
each.
L If you use 12-hour time entry, select "AM"
or "PM" by pressing {*} repeatedly
before entering the time.
8
Press {j/OK}.
9
Press {ih}.
Turning night mode on/off
1
Press {j/OK}.
2
Select "Mobilteileinst.", then press
{>}.
3
Select "Ruftoneinstell.", then press
{>}.
4
Select "Nachtmodus", then press {>}.
5
Select "Ein/Aus", then press {>}.
6
Select "Ein" or "Aus", then press {>}.
22
7
Press {ih}.
Hinweis:
L When the night mode is turned on, "[N]" is
displayed.
Setting the ring delay for night mode
This setting allows the handset to ring during
night mode if the caller waits long enough. After
the selected amount of time passes, the handset
will ring, useful when someone urgently needs to
speak with you. If you select "Kein
Rufsignal", the handset will not ring during
night mode.
1
Press {j/OK}.
2
Select "Mobilteileinst.", then press
{>}.
3
Select "Ruftoneinstell.", then press
{>}.
4
Select "Nachtmodus", then press {>}.
5
Select "Rufverzögerung", then press
{>}.
6
Select the desired setting, then press {>}.
7
Press {ih}.
Selecting categories to bypass night mode
1
Press {j/OK}.
2
Select "Mobilteileinst.", then press
{>}.
3
Select "Ruftoneinstell.", then press
{>}.
4
Select "Nachtmodus", then press {>}.
5
Select "Kateg. Auswähl.", then press
{>}.
6
Press the desired category numbers, then
press {j/OK}.
L The selected category number will flash.
L To cancel a selected category number,
press the number again. The number will
stop flashing.
7
Press {ih}.
Hinweis:
L If a call is received from one of the categories
set to bypass night mode, only the handset will
ring.