Table of Contents
Advertisement
3
3.6
Useful Functions
Panel Resetting
Press the [AUTO RESET] key to return all modes and functions (zoom ratio,
number of copies, etc.) to their defaults. (All selected settings are canceled.)
Tip
The [AUTO RESET] key comes in handy for canceling all selected settings at
one time.
To avoid accidentally using settings from the previous copy job, press the
[AUTO RESET] key to return all functions and settings to their defaults before
specifying any settings for your current job.
Auto Reset
Even if the [AUTO RESET] key is not pressed, the machine automatically resets all
functions and settings to their defaults 1 min after a copy cycle has been completed
or a key operation is performed.
Tip
The length of time before the machine automatically resets itself can be set
between 1 min and 5 min in addition to 30 seconds. The Auto Reset function
can even be disabled.
For details, refer to "Specifying the Setting for "AUTO RESET"" on page 5-4.
Power Save Mode
Instead of turning off the machine, it can be set into a standby state (Power Save
mode).
If the machine is not used for a set length of time, it will automatically enter the
Power Save mode. The default length of time is 15 min.
To cancel the Power Save mode, press any key on the control panel.
Tip
The length of time before the machine enters the Power Save mode can be set
between 1 min and 240 min.
For details, refer to "Specifying the Setting for "POWER SAVE MODE"" on
page 5-5.
3-12
3.6 Useful Functions
Konica 7416CG/7416CP
Advertisement
Table of Contents
