■
Analogue
Set Analogue channel manually after
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with
/
4. Select
Store
with
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
To update DVB-S channels, set Satellite,
●
before updating.
1) Select
Satellite
to access
2) Set each item with
3) After settings, select
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List
pressing OK.
Auto
/
and press
OK
to make small adjustments to the tuning of an individual
Lock, etc.
/
Search Mode
/
Scan Mode
/
and press
Start scan
with
- 64 -
Setup.
to set
Favourites
Search Mode
and
with
/
OK
to store
/
and press
OK
Update Channel
Edit,
Scan Mode
and press
OK
to search