Update Channel List; New Channel Message; Signal Condition - Panasonic TX-L42E6B Manual

Update Channel List

By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel List, Child
Depending on the signal condition, the update may not work properly.
●

New Channel Message

Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List pressing OK.

Signal Condition

Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial)
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB mode
●
Lock, etc.
- 57 -
Favourites Edit,
Update Channel