Table of Contents
Advertisement
= Note =
Display the image (TV, external input, etc.) full-screen to use this function
●
completely.
Aspect mode can be memorised separately for SD (Standard definition)
●
and HD (High definition) signals.
Aspect cannot be changed in teletext service and 3D mode.
●
Aspect Control Signal
Programmes usually contain an "Aspect Control Signal" (Widescreen signal,
Control signal through SCART / HDMI terminal).
In
Auto
mode, aspect mode will appear in the top left of the screen if a
Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI
terminal is found. The aspect will switch to the appropriate ratio.
Watching
■
Available conditions
●
Satellite terminal (WSS only)
Valid input signal format:
DVB-S
●
Terrestrial / cable terminal (WSS only)
Valid input signal format:
DVB-C
DVB-T
PAL D, K
SECAM D, K
Invalid input signal format:
PAL 525/60 6.5 MHz
PAL 525/60 6.0 MHz
PAL 525/60 5.5 MHz
M.NTSC 6.5 MHz
M.NTSC 6.0 MHz
M.NTSC 5.5 MHz
For best picture
Aspect
- 37 -
Advertisement
Table of Contents
